VX Infinity Series

The detection length can be adjusted to 12m, 8.5m, 6m, 5.5m or 2.5 metres. The VXI will also come with pre-cut masking templates to focus on a particular section of the detection area.

It is important to make sure the VXI is mounted correctly between 0.8 and 1.2 metres because if it is mounted lower or higher than this, it will not detect reliably or accurately. When the mounting process is complete, the lower pyro can then be adjusted between settings 1 to 5 in order to match the required detection area. The sensor range can be adjusted between 2.5 and 12 metres.

It is important to note that each installation is unique, so when you install a detector you need to walk test it to confirm it is detecting where it is supposed to be. Remember to replace the lens before walk testing or you will not achieve the full range.

The maximum detection area of the VXI is a 90 degree detection angle covering 12 metres. The VXI detector comes complete with a set of masking seals, each of which have pre-configured templates. The masking seals work well in tight environments where the standard detection area is too large. By selecting and fixing the correct seal for the environment, the VXI will no longer alarm on areas which could cause nuisance alarms such as public walkways.